官田鋼鐵股份有限公司

Products

Carbon Steel Wire*

Deformed Bar in Coil*

Spheroidized Wire*

Galvanized Wire*

All Thread Rod*

Screw*

Drywall

Chipboard

Galvanized Wire*

?Product Introduction

Not only hot rolled steel wire rod、deformed bar in coil、spheroidized wire and hard drawn wire products, we also produce hot dip galvanized wire product as well.

?Factory Information

Foundation :January 1995

Annual Capacity :400,000 Tons / Year

Numbers of Staff :250

Feature :About 236,000 Square Meters

Feature :

•Grinding equipment for surface quality improvement.

•Walking beam type of reheating furnace for uniformity.

•Two strands high speed rolling Coil weight up to 2 tons.

Billet conditioning facility is a key feature of this plant. All of our billet must go through the detecting and grinding process before being rolled into the wire rods for assuring the surface quality.

Brief History ：

1995：Quintain Plant Founded

1997：Commercial Run of Wire Rolling Mill Commercial Run of Billet Conditioning Line

1999：Accredited ISO-9002 Quality System Accredited CNLA Laboratory Certificate

2006：Accredited TAF Certificate of Deformed Bars in Coil"Chiai Industrial Co., Ltd." changed the name to "Quintain Steel Co., Ltd."

Address:

4F, NO.47, Xinjian Rd., South Dist.,Tainan City 70255, Taiwan

Tel. ： 886-6-2643888

Fax. ： 886-6-2647188

?Product Specification

Product: Galvanized Steel Wire ( Standard ： JIS G3547 SWMGS-2 / CNS 14302 SWMGS-2 ) Product Diameter ： 0.80mm ~ 6.00mm

1.Diameter:

Tolerance ： 2.0 ↓ ± 0.03 ㎜、 2.0 ↑ ± 0.05 ㎜。

BWG	Dia.	BWG	Dia.	BWG	Dia.	BWG	Dia.
#4	6.0	#5	5.4	#6	5.0	#7	4.5
#8	4.0 3.9	#9	3.8 3.7	#10	3.5 3.2	#11	3.0
#12	2.8 2.6	#13	2.4	#14	2.2 2.0	#15	1.85
#16	1.65	#17	1.4	#18	1.2	#19	1.0
#20	0.9	#21	0.8

Unit ：㎜

2.Tensile Strength ： 30~55 ㎏ / ㎜ 2 (290~540 N/ ㎜ 2 ) 。

3.Zinc Coating (g/m 2 ) ：

Diameter m/m	Zinc Coating	Diameter m/m	Zinc Coating
1.40	20↑	3.20	30↑
1.60	20 ↑	3.50	35 ↑
1.80	20 ↑	4.00	35 ↑
2.00	25 ↑	4.50	40 ↑
2.30	25 ↑	5.00	45 ↑
2.60	25 ↑	5.50	50 ↑
2.90	30 ↑	Over 5.50	50 ↑

As for the intermediate wire diameter,the values of zinc ooating mass corresponding to the nearest smaller wire diameter given in table be applied .

Product: Galvanized Steel Wire ( Standard ： JIS G3547 SWMGH-2 / CNS 14302 SWMGH-2 ) Product Diameter ： 0.80mm ~ 6.00mm

1.Diameter:

Tolerance ： 2.0 ↓ ± 0.03 ㎜、 2.0 ↑ ± 0.05 ㎜。

BWG	Dia.	BWG	Dia.	BWG	Dia.	BWG	Dia.
#4	6.0	#5	5.4	#6	5.0	#7	4.5
#8	4.0 3.9	#9	3.8 3.7	#10	3.5 3.2	#11	3.0
#12	2.8 2.6	#13	2.4	#14	2.2 2.0	#15	1.85
#16	1.65	#17	1.4	#18	1.2	#19	1.0
#20	0.9	#21	0.8

Unit ：㎜

2.Tensile Strength ( ㎏ / ㎜ 2 ) ：

Diameter m/m	Tensile Strength	Diameter m/m	Tensile Strength
1.40	---	3.20	55-85
1.60	---	3.50	50-80
1.80	60-90	4.00	40-80
2.00	60-90	4.50	40-80
2.30	60-90	5.00	40-80
2.60	25 ↑	5.50	50 ↑
2.90	55-85	Over 5.50	---

3.Zinc Coating (g/m 2 ) ：

Diameter m/m	Zinc Coating	Diameter m/m	Zinc Coating
1.40	20↑	3.20	30↑
1.60	20 ↑	3.50	35 ↑
1.80	20 ↑	4.00	35 ↑
2.00	25 ↑	4.50	40 ↑
2.30	25 ↑	5.00	45 ↑
2.60	25 ↑	5.50	50 ↑
2.90	30 ↑	Over 5.50	50 ↑

Asfor the intermediate wire diameter,the values of zinc ooating mass corresponding to the nearest smaller wire diameter given in table be applied .

?Main Facilities

Packing Area	Drawing Wire Area
Annealing Area	Acid Pickling Area--Semi Product
Pay Off Area	Galvanization Area
Take Up Area	Acid Pickling Area--Wire Rod

Customer Service Provides satisfaction the service is we greatest achievement

Head Office	>Tel：06-2643888 Fax：06-2641789
Wire Rod Deformed Bar in Coil	>Tel：06-2925658 Fax：06-2925581 Fax：06-2925591
Spheroidized Wire	>Tel：06-2925698 Fax：06-2925581 Fax：06-2925591
Galvanized Wire	>Tel：06-2925661 Fax：06-2925581 Fax：06-2925591
Export department	>Tel：06-2646288 Fax：06-2647188